Presentations

P1. Daqaq, M. F., “Modeling and Characterization of A Ferrofluidic Vibratory Energy Harvester under Direct and Parametric Excitations,” Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS 2016, Stowe, VT, 2016.

P2. Daqaq, M. F., “A Broadband Bi-stable Wake-galloping Flow Energy Harvester,” in Proceedings of the ASME Dynamic Systems and Control Conference, DSCC 2016, Minneapolis, MN, Oct. 2016.

P3. Daqaq, M. F., “Performance of Nonlinear Energy Harvesters in A Stochastic Environment”, C. D. Mote Award Reception Talk, ASME International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2016, Charlotte, NC, August 2016.

P4. Daqaq, M. F., “Powering Remote Sensors Using Non-traditional Micro-power Generation Techniques”, New York University, Brooklyn, NY, March 2016.

P5. Daqaq, M. F., “Useful Vibrations: A New Paradigm for Powering Remote Sensor Networks”, Distinguished Speakers Seminar Series, Masdar Institute of Science and Technology, Abu Dhabi, UAE, Oct. 2015.

P6. Daqaq, M. F., “On the Effectiveness of Incorporating Stiffness Nonlinearities for Energy Harvesting, University of Rome, LaSapienza, Rome, Italy, June 2015.

P7. Daqaq, M. F., “Broadband Energy Harvesting: Is Intentional Introduction of Nonlinearities a Solution or Just Another Unsuccessful Research Endeavor?, The Ohio State University, Columbus, OH, Mar 2015.

P8. Daqaq, M. F., “Critical Insights into Intentional Use of Nonlinearities for Broadband Energy Harvesting, Clarkson University, Potsdam, NY, Sept 2014.

P9. Daqaq, M. F., “Energy Harvesting Using Nonlinear Oscillators: A Critical Review, Kuwait University, Kuwait, June 2014.

P10. Daqaq, M. F., “Flow Energy Harvesting,” Imperial College of London, London, Dec. 2013.

P11. Daqaq, M. F., “Powering Remote Sensors Using Self-Excited Oscillations,” University of North Carolina, Charlotte, Dec. 2012.

P12. Daqaq, M. F., “Powering Remote Sensors Using Self-Excited Oscillations,” University of North Carolina, Charlotte, Dec. 2012.

P13. Daqaq, M. F., “Vibratory Energy Harvesting in Random Environments,” Duke Vibrations Workshop, Duke University, Durham, NC, May, 2010.

P14. Daqaq, M. F., “Recent Advances in Vibratory Energy Harvesting,” Department of Mechanical Engineering, Kuwait University, Saffat, Kuwait, Dec., 2009.

P15. Daqaq, M. F., “A Scalable Wind Energy Harvester for Powering Remote Low-Power Consumption Sensors,” National Science Foundation Workshop on Structural Health Monitoring and Control, Amman, Jordan, June 21-23, 2010.

P16. Daqaq, M. F., “Useful Vibrations: The Operation Concept, Latest Advances, and Shortcomings of Vibratory Micro-Power Generators,” Department of Physics, Hamline University, St. Paul, MN, Oct., 2009.

C1. Emam, S., Panyam, M., and Daqaq, M. F., “Exploiting the Subharmonic Parametric Resonance of a Bi-Stable Beam for Energy Harvesting,” Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS 2017, Snowbird, UT, SMASIS2017-3799, 2017.

C2. Abusoua A. and Daqaq, M. F.,  “Experimental Evidence of Vibrational Resonance in a Bi-Stable Twin-Well Mechanical Oscillator,” Conference on Smart Materials, Adaptive Structures and Intelligent SMASIS 2017, Snowbird, UT, SMASIS2017-3897, 2017.

C3. Alhadidi, A., and Daqaq, M. F.,  “A Broadband Bi-stable Wake-galloping Flow Energy Harvester,” (invited paper) accepted for publication in Proceedings of ASME Dynamic Systems and Control Conference, DSCC 2016, Minneapolis, MN, 2016.

C4. Abusoua A. and Daqaq, M. F.,  “Nonlinear Parametric System Identification Using Hard Excitations,” Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS 2016, Stowe, VT, SMASIS2016-9075, 2016.

C5. Al-Azmi, A., Xu, Y., and Daqaq, M. F.,  “An Experimentally-Validated Distributed-Parameters Model of a Ferrofluid Based Energy Harvester,” accepted for publication in Proceedings of ASME International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2016, Charlotte, NC, 2016.

C6. Alhadidi, A., Aitrahmman, H., and Daqaq, M. F.,  “Utilizing bi-stability to improve the performance of wake-galloping flow energy harvesters under unsteady flow conditions,” accepted for publication in Proceedings of ASME International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2016, Charlotte, NC, 2016.

C7. Daqaq, M. F., Xu, Y., and Lacarbonara, W.  “Nonlinearity of Finite-Amplitude Waves in Rectangular Containers,” accepted for publication in Proceedings of ASME International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2016, Charlotte, NC, 2016.

C8. Panyam, S., and Daqaq, M. F.,  “Characterizing the Effective Bandwidth of Tri-Stable Energy Harvesters,” in Proceedings of ASME International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2016, Charlotte, NC, 2016.

C9. Noel, J., and Daqaq, M. F.,  “Exploiting a Tail Fin to Improve the Performance of Galloping Flow energy Harvesters,” accepted for publication in Proceedings of ASME International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2016, Charlotte, NC, 2016.

C10. Noel, J., Janajreh, I., and Daqaq, M. F.,  “Improving the Transient Behavior of Galloping Energy Harvesters using a Tail Fin,” in Proceedings of the 13^th International Conference on Fluid Control, Measurements, and Visualization, 2015.

C11. Chen, L., Wen-An, J., Panyam, M. and Daqaq, M. F.,  “Nonlinear Modal Interactions to Improve the Broadband Transduction of Vibratory Energy Harvesters,” in Proceedings of the ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS 2015, Denver, CO, SMASIS2015-8831, 2015.

C12. Alhadidi, A., and Daqaq, M. F.,  “Exploiting Bi-Stability to Enhance Energy Capture from Turbulent Flows,” in Proceedings of the ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS 2015, Denver, CO, SMASIS2015-8831, 2015.

C13. Alhadidi, A., Bibo, A., and Daqaq, M. F.,  “Flow Energy Harvesters with a Nonlinear Restoring Force,” in Proceedings of the ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS 2014, Newport, RI, SMASIS2014-7445, 2014.

C14. Bibo, A., and Daqaq, M. F.,  “New Insights Into the Performance and Optimization of Galloping Flow Energy Harvesters,” in Proceedings of the ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS 2014, Newport, RI, SMASIS2014-7453, 2014.

C15. Alazmi, A., Bibo A., and Daqaq, M. F.,  “Concurrent Vibration Suppression and Energy Harvesting Using Ferrofluids: An Experimental Investigation,” in Proceedings of the ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS 2014, Newport, RI, SMASIS2014-7456, 2014.

C16. Bibo, A. and Abdelkefi, A., and Daqaq, M. F.,  “Modeling and Experimental Validations of a Piezoelectric Energy Harvester under Combined Galloping and Base Excitations,” in Proceedings of ASME International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2014, Buffalo, NY, 2014.

C17. He, Q. and Daqaq, M. F., “Influence of Potential Function Asymmetries on the Performance of Nonlinear Energy Harvesters Under White Noise,” in Proceedings of ASME International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2014, Buffalo, NY, 2014.

C18. Bibo, A. and Daqaq, M. F.,  “Concurrent Energy Harvesting from Vibratory Base Excitations and Aerodynamic Flows,” in Proceedings of the ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS 2013, Snowbird, UT, SMASIS2013-3115, 2013.

C19. Panyam, M. and Daqaq, M. F.,  “Response Of An Axially-Loaded Terfenol-D Rod To A Harmonic Base Excitation,” in Proceedings of the ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS 2013, Snowbird, UT, SMASIS2013-3313, 2013.

C20. Alazmi, S. and Daqaq, M. F.,  “Ferrofluids For Concurrent Vibration Absorption and Energy Harvesting,” in Proceedings of the ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS 2013, Snowbird, UT, SMASIS2013-3313, 2013.

C21. He, Q. and Daqaq, M. F., “Load Optimization of A Nonlinear Mono-Stable Duffing Harvester Operating in a White Noise Environment,” in Proceedings of the ASME 2012 International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2013, Portland, OR, DETC2013-13126, 2013.

C22. Liu Q., Daqaq, M. F. and Li G., ``Modeling and Simulation of Electromagnetic Ferrofluid-Based Energy Harvesters,'' in Proceedings of the ASME IMECE 2013, IMECE2013-65727, 2013.

C23. Silva, C. and Daqaq, M. F., “On Utilizing Approximate Modal Shapes to Estimate the Effective Nonlinearity of Structural Modes,” in Proceedings of the ASME 2012 International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2012, Chicago, IL, DETC2012-71113, 2012.

C24. Masana, R. and Daqaq, M. F., “Performance of a Randomly-Excited Nonlinear Energy Harvester in Mono- and Bi-Stable Potentials: An Experimental Investigation,” in Proceedings of the ASME 2012 International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2012, Chicago, IL, DETC2012-71451, 2012.

C25. Gibert, J., Fadel, G., and Daqaq, M. F., “Understanding the Stick-Slip Dynamics of Ultrasonic Additive Manufacturing,” in Proceedings of the ASME 2012 International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2012, Chicago, IL, DETC2012-70567, 2012.

C26. Bibo, A. and Daqaq, M. F.,  “Energy Harvesting and Combined Aerodynamic and Base Excitations,” in Proceedings of the ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS 2012, Atlanta, GA, SMASIS2012-7908, 2012.

C27. Gibert, J., Alazemi, S., Paige, F., and Daqaq, M. F., “New Insights in Piezoelectric Energy Harvesting Using a Dynamic Magnifier,” in Proceedings of the ASME 2012 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS 2012, Atlanta, GA, SMASIS2012-8086, 2012.

C28. Bode, D. R., and Daqaq, M. F.,  “Parametric Amplification in the Context of Vibratory Energy Harvesting,” in Proceedings of the ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS 2011, Scottsdale, AZ, SMASIS2011-5030, 2011.

C29.  Masana, R., and Daqaq, M. F., “Exploiting Super-Harmonic Resonances of A Bi-Stable Axially-Loaded Beam For Energy Harvesting under Low-Frequency Excitations,” in Proceedings of the ASME 2011 International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2011, Washington, DC, DETC2011-47723, 2011.

C30. Masana, R., and Daqaq, M. F., “Comparing the Performance of A Nonlinear Energy Harvester in Mono- and Bi-Stable Potentials,” in Proceedings of the ASME 2011 International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2011, Washington, DC, DETC2011-47828, 2011.

C31. Bibo, A., Li, G., and Daqaq, M. F., “Design Considerations for An Aero-elastic Micro-Power Generator,” in Proceedings of the ASME 2011 International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2011, Washington, DC, DETC2011-47833, 2011.

C32. Bibo, A., St. Clair, D., Sennakesavababu, V., Li, G., and Daqaq, M. F., “A Nonlinear Electromechanical Model of A Scalable Self-Excited Wind Energy Harvester,” in Proceedings of the ASME 2009 International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2010, Montreal, Canada, DETC2010-28921, 2010.

C33.  St. Clair D., Stabler C., Daqaq, M. F., Luo J., and Li G., “A Smart Device for Harnessing Energy from Aerodynamic Flow Fields,” Proceedings of the ASME 2009 International Conference and Exposition, Lake Buena Vista, Fl, IMECE 2009-12301, 2009.

C34.  Daqaq, M. F., “New Insight into Energy Harvesting via Axially-Loaded Beams,” in Proceedings of the ASME 2009 International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2009, San Diego, CA, DETC2009-86974, 2009.

C35.   Starling, T., Daqaq, M. F., and Li, G., "Computational Analysis of Input-Shaping Control of Torsional Microelectromechanical Mirrors," Proceedings of the 2009 ASME International Mechanical Engineering Congress and Exposition, IMECE2009-10948, 2009.

C36. Seuaciuc-Osorio, T. and Daqaq, M. F., “Reduced-Order Modeling of Energy Harvesters,” in Proceedings of the ASME 2009 International Design and Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2009, San Diego, CA, DETC2009-87287, 2009.

C37.  Daqaq, M. F., and Vogl, G., “Frequency Islands in The Primary Resonance of Nonlinear Delay Systems,” in Proceedings of the 6th EUROMECH Nonlinear Dynamics Conference (ENOC 2008), Saint Petersburg, Russia, 2008.

C38. Mahmoodi, N., Daqaq, M. F., and Jalili, N., “Nonlinear Dynamics of A Piezoelectrically-actuated Microcantilever Sensor,” in Proceedings of the 6th EUROMECH Nonlinear Dynamics Conference (ENOC 2008), Saint Petersburg, Russia, 2008.

C39. Bradely, C., Daqaq, M. F., and Jalili, N., “Experimental Study on Utilizing   Delayed Feedback for Ultra-Sensitive Sensing,” in Proceedings of the IMECE 2007, International Mechanical Engineering Conference and Exposition, November 5-10, Seattle, WA, IMECE2007-42513, 2007.

C40.  AlHazza, K., Nayfeh, A. H., and Daqaq, M. F., “Delayed-Acceleration Feedback for Active-Multimode Vibration Control of Cantilever Beams,” in Proceedings of the ASME International Design and Engineering Technical Conference, IDETC2007, September 4-7, Las Vegas, NV, DETC2007-34793, 2007.

C41. Daqaq, M. F., Alhazza, K., and Stanton, S., “Effect of Feedback Delays on Nonlinear Vibrations of Cantilever Beams,” in Proceedings of the ASME International Design and Engineering Technical Conference, IDETC2007, September 4-7, Las Vegas, NV, DETC2007-35085, 2007.

C42. Daqaq, M. F., Bradely, C., Jalili, N., and Alhazza, K., "Feedback Delays for Ultrasensitive Sensing," in Proceedings of the ASME International Design and Engineering Technical Conference, IDETC2007, September 4-7, Las Vegas, NV, DETC2007-35088, 2007.

C43. Renno, J., Daqaq M. F., Farmer, J., and Inman, D. J., “Parameter Optimization of a Vibration-Based Energy Harvester,” in Proceedings of the ASME International Design and Engineering Technical Conference, IDETC2007, September 4-7, Las Vegas, NV, 2007.

C44. Daqaq, M. F., Renno, J., Farmer, J., and Inman, D. J., “Effects of System Parameters and Damping on an Optimal Vibration-Based Energy Harvester,” in Proceedings of the 48th Structures, Structural Dynamics, & Materials (SDM) Conference (AIAA), Honolulu, HI, 7901-7911, 2007.

C45.  Daqaq, M. F., Abdelrahman E. M., and Nayfeh, A. H., “Modal Interactions in Resonant Microscanners,” in Proceedings of the IMECE 2006, International Mechanical Engineering Conference and Exposition, November 5-10, Chicago, IL, IMECE2006-13844, 2006.

C46. Daqaq, M. F., and Masoud, Z. N., “A Graphical Phase Plane Approach for Controlling Cargo Transfer on Quay-Side Container Cranes with Hoisting,” in Proceedings of the 46^th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Material Conference, AIAA, Austin, TX, 2005.

C47. Hader, M. A., Al-Nimr, M. A., and Daqaq, M. F., “Effect of Operating Pressure on the Performance of a Novel Air Conditioning System,” in Proceedings of the IASTED International Conference on Power and Energy Systems (EuroPES2001), ISATED, Rhodes, Greece, 2001.

C48. Bibo, A., and Daqaq, M. F.,  “On the Optimal Performance and Universal Design Curves of Galloping Energy Harvesters,” 17th U.S. National Congress on Theoretical and Applied Mechanics, Michigan State University, East Lancing, 2014.

C49. Bibo, A., Masana, R., King, A., Li, G., and Daqaq, M. F., “Investigating the Energy Harvesting Potential of Ferrofluids Sloshing in Base-Excited Containers,” in Proceedings of the 19^th SPIE International Symposium on: Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, CA, 2012.

C50. Alhazza, K. A., Vogl, G.W., and Daqaq M. F., “Frequency Islands in the Primary Resonance of Nonlinear Delay Systems,” in Proceedings of the Thirteenth Conference on Nonlinear Vibrations, Dynamics, and Multibody Systems, Blacksburg, VA, 2010.

C51. Seuaciuc-Osorio, T., and Daqaq, M. F., “Analytical Analysis of Power Harvesting from Environments with Time-Varying Frequency,” in Proceedings of 2009 Joint ASCE-ASME-SES Conference on Mechanics and Materials, Blacksburg, VA, 2009.

C52. Stabler, C., Seuaciuc-Osorio, T., Qaroush, Y., and Daqaq, M. F., “Energy Harvesting via Parametric Excitations,” in Proceedings of 2009 Joint ASCE-ASME-SES Conference on Mechanics and Materials, Blacksburg, VA, 2009.

C53.  Qaroush, Y., Daqaq, M. F., Saeidporazar, R., and Jalili, N., “Feedback Delays for Vibration Mitigation at the Microscale,” in Proceedings of the 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, CA, 2009.

C54. Seuaciuc-Osorio, T., and Daqaq, M. F., “Parameter Optimization of a Magnetostrictive Vibration-Based Energy Harvester,” in Proceedings of the 15^th SPIE International Symposium on: Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, v 6928, San Diego, CA, 2008.

C55. Daqaq, M. F., and Li, G., “Powering Remote Sensors Using Scalable Self-Excited Micro-Power Generators,” in Proceedings of the NSF Engineering Research and Innovation Conference, Atlanta, GA, 2011.

C56. Daqaq, M. F., “Response of Duffing-Type Energy Harvesters to Random Excitations,” in Proceedings of the IMAC- XXVIII Conference and Exposition on Structural Dynamics, Jacksonville, FL, 2010.

C57. Daqaq, M. F., Reddy, K. C., and Nayfeh A. H., “Input-Shaping Control of Nonlinear MEMS,” in Proceedings of the IMAC-XXII Conference and Exposition on Structural Dynamics, Orlando, FL, 2006.

C58. Daqaq, M. F., Masoud, Z. N., and Nayfeh A. H., “Nonlinear Modeling and Control of Quay-Side Container Cranes,” in Proceedings of the IMAC-XXII Conference and Exposition on Structural Dynamics, Orlando, FL, 2005.